Effect of Chelating Agents on Push-Out Bond Strength of NeoMTA Plus to Root Canal Dentin

ABSTRACT Objective To evaluate and compare the effect of 17% Ethylenediaminetetraacetic Acid (EDTA), 9% Etidronic acid (HEDP), and 7% Maleic acid (MA) on the push-out bond strength of NeoMTA Plus sealer to the coronal, middle, and apical thirds of root canal dentin. Material and Methods Forty single-rooted human maxillary central incisors were selected and decoronated to 12 mm long root fragments. Working length was established and root canals were then enlarged up to rotary Protaper F3. After each instrumentation, the root canal was irrigated with 2.5% NaOCl. For the final irrigation regimen, the specimens were divided into 4 groups (n=10) and treated with EDTA, HEDP, MA or Saline. Root canals were coated with NeoMTA Plus sealer, and obturation was done with single cone obturation technique. Subsequently, three horizontal sections were taken from the coronal, middle and apical thirds of each specimen, and POBS was measured using a universal testing machine. The type of bond failures was assessed under a stereomicroscope. Statistical analysis was done with One-way ANOVA with Tukey's Post hoc analysis. Results MA and EDTA showed the highest POBS. There was no significant difference in bond strength between MA and EDTA (p>0.05). HEDP and Saline showed lower POBS. Among all the four groups, the coronal third showed the highest values, followed by middle and apical thirds. Conclusion The type of chelating agent used during the root canal treatment significantly affects the bond strength of NeoMTA Plus to the root canal dentin.

The effect of acid concentration and etch time on morphology and tensile bond strength of primary dentin An in vitro study

Background: There are conflicting results concerning the ideal time for etching primary dentin and its effect on the bond strength of adhesive restorative materials. Aim: To assess in vitro, the effect of varied acid concentration and etch time on the morphological features and tensile bond strength of primary dentin. Materials and Methods: Forty healthy primary molars were prepared by exposing the dentin of the occlusal surface, creating a smear layer. A 3 mm × 3 mm test indow was demarcated, and specimens were randomly allocated to four groups (n = 10): Group 1A 10% phosphoric acid, 7 s; Group 1B 10% phosphoric acid, 15 s; Group 2A 37% phosphoric acid, 7 s and Group 2B 37% phosphoric acid, 15 s. Surface analysis was done using atomic force microscope and scanning electron microscope. For tensile bond strength evaluation, 24 specimens prepared as mentioned were mounted in acrylic blocks and allocated to four groups according to the prescribed etching protocol. Resin rods were bonded and tested in tension after 24 h (n = 6). Data were analyzed statistically using unpaired t-test. Results: Etching of primary dentin using 37% phosphoric acid for 7 s produced the highest tensile bond strength of 9.51 ± 2.19 MPa. Conclusion: Etching time of 7 s may improve the adhesion of resin restorative materials with primary dentin.

Effect of Thermocycling on the Colour Stability of Aesthetic Restorative Materials: An in-vitro Spectrophotometric Analysis

Abstract Objective: To compare the color stability of Cention N, Fuji IX GP Extra, and Fuji IX GP after thermocycling. Material and Methods: Ten discs of each material of dimension 10 x 1 mm were prepared using a split mold. The preparations of the specimens were done according to the powder/liquid ratio as recommended by the manufacturers [4.6:1, 3.4:1 and 3.6:1 for the groups I, II, and III, respectively]. After setting, the samples were retrieved, and the thickness of each specimen was measured using a micrometer at five different locations. The specimens with variations in thickness, porosity or cracks were discarded and thus not included in the study. The selected specimens were stored in distilled water for 24 hours prior to testing. The prepared specimens were thermocycled at 5°C and 55°C, with a dwell time of 15 seconds for 250 or 500 cycles. Subsequently, the color parameters of the discs were measured using a spectrophotometer. The data were analyzed using two way ANOVA test, and a p-value <0.001 was considered. Results: Thermocycling resulted in changes in the color of both Glass Ionomer cement and Cention N (p<0.001). Among the materials tested, Cention N showed superior color stability. Conclusion: Cention N exhibited better color stability compared to Glass ionomer cements.

Fracture resistance of teeth obturated with two different types of mineral trioxide aggregate cements / Resistência à fratura de dentes obturados com dois tipos diferentes de cimentos agregados de trióxido minera

Objective: Endodontically obturated teeth have lower fracture resistance depending on the obturating material and technique. The purpose of this study was therefore to evaluate the influence of ProRoot MTA (Dentsply Sirona, Tulsa Division) and OrthoMTA III (BioMTA, Daejeon, Korea) as an obturating material on the fracture resistance of endodontically treated teeth. Material and Methods: Thirty extracted human maxillary central incisors were decoronated and instrumented using Protaper instruments (size F5). Irrigation was performed with 2.5% sodium hypochlorite between each instrument change followed by 7% maleic acid for one minute. Finally, canals were flushed with 5 ml of PBS solution for one minute. Samples were then divided into three groups. Group I- positive control (no root canal filling); Group II- obturation with ProRoot MTA; Group III- obturation with OrthoMTA III. Ten teeth were randomly selected as a negative control in which no treatment was performed. All the specimens were then subjected to fracture strength testing using universal testing machine. For evaluation of biomineralization, six maxillary central incisors were divided into two groups. Group I obturated with ProRoot MTA and group II obturated with OrthoMTA III. These samples were subjected to SEM analysis. Results: Positive control group demonstrated the least fracture resistance, while OrthoMTA III group showed the highest fracture resistance. There was no significant difference between negative control group and ProRoot MTA groups (p=0.821). OrthoMTA III group showed better tubular biomineralization when compared to ProRoot MTA. Conclusions: Root canals obturated with OrthoMTA III had better fracture resistance and increased tubular biomineralization compared to ProRoot MTA. Since root canals obturated with OrthoMTA III had better fracture resistance, it can be used as a promising obturating material.(AU)

Objetivo: Dentes obturados endodonticamente apresentam menor resistência à fratura, dependendo do material e da técnica de obturação. Portanto, o objetivo deste estudo foi avaliar a influência do ProRoot MTA (Dentsply Sirona, Tulsa Division) e OrthoMTA III (BioMTA, Daejeon, Coréia) como material obturador na resistência à fratura de dentes tratados endodonticamente. Material e Métodos: Trinta incisivos centrais superiores humanos extraídos foram decoronados e instrumentados com instrumentos Protaper (tamanho F5). A irrigação foi realizada com hipoclorito de sódio a 2,5% entre cada troca de instrumento, seguida por ácido maleico a 7% por um minuto. Finalmente, os canais foram lavados com 5 ml de solução de PBS por um minuto. As amostras foram então divididas em três grupos. Grupo I - controle positivo(sem preenchimento do canal radicular); Grupo II - obturação com ProRoot MTA; Grupo III -obturação com OrthoMTA III. Dez dentes foram selecionados aleatoriamente como controle negativo, no qual nenhum tratamento foi realizado. Todas as amostras foram então submetidas atestes de resistência à fratura usando uma máquina de teste universal. Para avaliação da biomineralização, seis incisivos centrais superiores foram divididos em dois grupos: grupo Iobturado com ProRoot MTA e grupo II obturado com OrthoMTA III. Essas amostras foram submetidas à análise SEM. Resultados: O grupo controle positivo demonstrou a menor resistência à fratura, enquanto o grupo OrthoMTA III apresentou a maior resistência à fratura. Não houve diferença significativa entre o grupo controle negativo e os grupos ProRoot MTA (p= 0,821). O grupo OrthoMTA III apresentou melhor biomineralização tubular quando comparado ao ProRoot MTA. Conclusões: Os canais radiculares obturados com OrthoMTA III apresentaram melhor resistência à fratura e maior biomineralização tubular em comparação como ProRoot MTA. Como os canais radiculares obturados com OrthoMTA III apresentaram melhor resistência à fratura, podendo ser utilizado como um material obturador promissor.(AU)